1. Home

RULES

  1. Introduction
  2. MA Structure
  3. General Competition Rules And Making Rule Changes
  4. Jurisdiction s
    1. 1.1 Definitions
    2. 1.2 Purpose of Rules
    3. 1.3 Repeal of Current Gcrs
    4. 1.4 by Laws
  5. Administration s
    1. 2.1 The Controlling Bodies
    2. 2.2 Sports Development Levy
    3. 2.3 Sports Development Account
    4. 2.4 Officials
  6. Licensing s
    1. 3.1 Licensing Requirements
    2. 3.2 Licensing General
    3. 3.3 Licensing Seniors
    4. 3.4 Licensing Juniors
    5. 3.5 Licensing Entrants
    6. 3.6 Licensing Speedway Mechanics
    7. 3.7 Licence Issuing And Renewals
    8. 3.8 Junior Coaching Program
  7. Competitions s
    1. 4.1 Venues
    2. 4.2 The Promotion And Conduct of Competitions
    3. 4.3 MA Events
    4. 4.4 Protocols
  8. Alternative Forms of Competition s
    1. 5.1 Alternative Activities
    2. 5.2 Venues Alternative Activities
    3. 5.3 Permits : Alternative Activities
    4. 5.4 Supplementary Regulations Alternative Activities
    5. 5.5 Licensing of Competitors Alternative Activities
    6. 5.6 Technical Specifications Alternative Activities
  9. Recreational Motorcycle Activity s
    1. 6.1 Purpose
    2. 6.2 Recreational Activities
    3. 6.3 Controlling Bodies Recreational Activities
    4. 6.4 Officials Recreational Activities
    5. 6.5 Venues Recreational Activities
    6. 6.6 The Promotion And Conduct of Recreational Activity
    7. 6.7 Permits Recreational Activities
    8. 6.8 Entries
    9. 6.9 Licensing of Participants
  10. Offences Protests And Appeals s
    1. 7.1 Offences
    2. 7.2 Protests
    3. 7.3 Appellate Bodies
    4. 7.4 Appeals
  11. Judicial Committee Guidelines s
    1. 8.1 MA Hearing Guidelines
  12. National Personal Accident Insurance s
    1. 12.1 Summary of Policy Coverage
    2. 12.2 Capital Benefits
    3. 12.3 Weekly Benefits
    4. 12.4 Definitions
  13. Road Racing s
    1. SECTION 13 A: AUSTRALIAN CHAMPIONSHIPS
    2. SECTION 13 B: COMPETITION CLASSES
    3. SECTION 13C: COMPETITION RULES
    4. SECTION 13 D: TECHNICAL REGULATIONS
    5. SECTION 13 E: TECHNICAL REGULATIONS: SOLO CLASSES
    6. SECTION 13 F: TECHNICAL REGULATIONS: SIDECARS
    7. SECTION 13 G: TECHNICAL REGULATIONS: JUNIOR CLASSES
    8. SECTION 13 H: MINIMOTO
  14. Historic Road Racing s
    1. SECTION 14 A: AUSTRALIAN CHAMPIONSHIPS
    2. SECTION 14 B: COMPETITION CLASSES
    3. SECTION 14 C: COMPETITION RULES
    4. SECTION 14 D: TECHNICAL REGULATIONS: GENERAL
    5. SECTION 14E: TECHNICAL REGULATIONS: PERIOD
  15. Motocross And Supercross s
    1. SECTION 15 A: AUSTRALIAN CHAMPIONSHIPS
    2. SECTION 15 B: COMPETITION CLASSES
    3. SECTION 15 C: COMPETITION RULES
    4. SECTION 15 D: TECHNICAL REGULATIONS
  16. Classic Motocross And Dirt Track s
    1. SECTION 16 A: AUSTRALIAN CHAMPIONSHIPS
    2. Section 16 B Competition Classes
    3. SECTION 16 C: COMPETITION RULES
    4. SECTION 16 D TECHNICAL REGULATIONS
  17. Enduro And Reliability Trials s
    1. SECTION 17A: AUSTRALIAN CHAMPIONSHIPS
    2. SECTION 17B: COMPETITION CLASSES
    3. SECTION 17C: COMPETITION RULES
    4. SECTION 17D: TECHNICAL REGULATIONS
    5. SECTION 17E: AUSTRALIAN FOUR-DAY ENDURO CHAMPIONSHIPS
  18. ATV s
    1. SECTION 18A: AUSTRALIAN CHAMPIONSHIPS
    2. SECTION 18B: COMPETITION CLASSES
    3. SECTION 18C: COMPETITION RULES
    4. SECTION 18D: TECHNICAL REGULATIONS
  19. Speedway s
    1. SECTION 19A: AUSTRALIAN CHAMPIONSHIPS
    2. SECTION 19B: AUSTRALIAN SPEEDWAY CHAMPIONSHIP
    3. SECTION 19C: AUSTRALIAN TEAM CHAMPIONSHIPS
    4. SECTION 19D: COMPETITION RULES
    5. SECTION 19E: TECHNICAL REGULATIONS
  20. Dirt Track s
    1. SECTION 20A: AUSTRALIAN CHAMPIONSHIPS
    2. SECTION 20B: COMPETITION CLASSES
    3. SECTION 20C: COMPETITION RULES
    4. SECTION 20D: TECHNICAL REGULATIONS
  21. Track s
    1. SECTION 21A: AUSTRALIAN CHAMPIONSHIPS
    2. SECTION 21B: COMPETITION CLASSES
    3. SECTION 21C: COMPETITION RULES
    4. SECTION 21D: TECHNICAL REGULATIONS
  22. Supermoto s
    1. SECTION 22A: AUSTRALIAN CHAMPIONSHIPS
    2. SECTION 22B: COMPETITION CLASSES
    3. Section 22c Competition Rules
    4. SECTION 22D: TECHNICAL REGULATIONS
  23. Trial s
    1. SECTION 23A: AUSTRALIAN CHAMPIONSHIP
    2. SECTION 23B: COMPETITION CLASSES
    3. SECTION 23C: COMPETITION RULES
    4. SECTION 23D: TECHNICAL REGULATIONS
    5. SECTION 23E: CLASS TECHNICAL REGULATIONS
  24. Minikhana s
    1. SECTION 24A: MINIKHANA CLASSES
    2. SECTION 24B: COMPETITION RULES
    3. SECTION 24C: TECHNICAL REGULATIONS
    4. SECTION 24D: MINIKHANA COURSES
  25. Policies s
    1. 25.1 Member Protection Policy
    2. 25.2 Anti-doping Policy
    3. 25.3 Anti Match-fixing Policy
    4. 25.4 Privacy Regulation
    5. 25.5 Occupational Health and Safety Policy
    6. 25.6 Environmental Sustainability Policy
    7. 25.7 National Team Selection Policy

Rules

SECTION 17C: COMPETITION RULES


17.7 GENERAL ELIGIBILITY

17.7.1 General Eligibility

17.7.1.1 No person may participate in any competition, other than an Australian Championship, unless and until that person’s clothing and machine have been examined and approved by the Scrutineer for that competition.
17.7.1.2 No person may participate in an Australian Championship unless and until:

  1. That person’s clothing and machine have been examined and approved by the Scrutineer for that meeting, or
  2. If stipulated in Supplementary Regulations, the person provides the Scrutineer with a signed checklist that the clothing and machine have been self-scrutineered.
17.7.1.3 At scrutineering, competitors must produce documents or other evidence as required to verify engine and frame identity.
17.7.1.4 The onus of proving that a competitor, and the competitor’s machine and clothing, are eligible to compete, is on the person seeking to prove it.
17.7.1.5 Where any Rule prohibits the modification of any machine or class of machines, that machine or that class will be deemed to have been modified if any part or parts thereof have been altered from the machine or class as manufactured by the machine manufacturer.
17.7.1.6 In the interpretation of any Rule relating to the design requirements for any machine or class of machines, reference may be made to relevant diagrams appearing in these Rules.

17.8 AUSTRALIAN OFF ROAD CHAMPIONSHIP ELIGIBILITY

17.8.1 Enduro Junior

17.8.1.1 Riders must be 19 years or under on the 1st January of the competition year. Machines may be of any capacity.

17.8.2 Veterans Class

17.8.2.1 Riders must have turned 35 years before 1st January in the year of competition. Machines may be of any capacity.

17.8.3 Masters Class

17.8.3.1 Riders must have turned 45 years before 1st January in the year of the competition. Machines may be of any capacity.

17.8.4 Womens Class

17.8.4.1 Women may ride machines of any capacity.
17.8.4.2 To constitute a class, there must be a minimum of six competitors entered and competing in the Womens class.
17.8.4.3 Should there be insufficient numbers in this class, the riders will be included in the appropriate capacity class.

17.8.5 All classes

17.8.5.1 Only solo machines are eligible for the Australian Off Road Championships.
17.8.5.2 All machines must comply with GCR 17.18.5 and 17.18.9.3.
17.8.5.3 An environment mat, or other effective device is required to be used when refueling, replenishing all oils and chemicals (including the oiling of chains) in order to prevent contamination of the ground. The minimum dimensions of the mat or other effective device must be at least 500mm x 500mm. The penalty for non-compliance may be discretionary.
17.8.5.4 No rider competing in the AORC event may compete at another event at the same venue on any of the eight days immediately preceding the AORC event.

17.9 JUNIOR ELIGIBILITY

17.9.1 General

17.9.1.1 No person who is under the age of 16 years may compete in other than a Junior competition.
17.9.1.2 In Junior competition,

  1. A rider’s age on 1st January will determine their age for competition purposes for that year,
  2. A rider may move to the next higher age class when they become eligible by reason of celebrating a birthday, but once the rider moves to that higher age class, they may not move back to the lower age class,
  3. Any points earned by the rider in the lower age class cannot be transferred when the rider moves to the higher age class,
  4. This GCR applies to all riders up to and including the age of 16 years.
17.9.1.3 No person who is unable to lift his or her machine unaided from the horizontal to the vertical may compete in any Junior competition.
17.9.1.4 Subject to GCR 17.9.1.2 a) a Junior who is under the age of 9 years may compete on a 50cc automatic machine notwithstanding that the Junior is unable to lift the machine unaided from the horizontal to vertical.

  1. Junior competitors in the age groups listed in the tables above may compete in the corresponding classes:
  2. No applicant will be issued with their first competition licence if they are under the age of 7 years,
  3. Unless otherwise permitted in writing by the Relevant Controlling Body, for any event there must be no greater age variation between competitors than 4 years,
  4. No participant in the 50cc automatic class may compete in any other class other than at Club level competitions,
  5. In the 4 years to Under 9 years 50cc Demo Class automatic non-competitive class, all riders are entitled to receive a prize or award of the same size/value,
  6. Subject to the following two GCRs, a Relevant Controlling Body may permit age group racing, graded racing, or a combination of both,
  7. Age group racing:
    1. Subject to sub-Rule ii), only competitors in the same age groups may compete against each other,
    2. Competitors from different age groups in the following classes may compete with each other if there are insufficient entries for each class:
      1. 85cc 2 stroke big wheels and 100cc – 150cc 4 stroke single cylinder,
      2. 100cc – 150cc single cylinder & 250cc 4 stroke,
  8. A Relevant Controlling Body may grade junior competitors according to their respective skills,
  9. Demo class is a non-competitive class.
17.9.1.5 4-stroke non-motocross type machines 80cc to 160cc are approved for competition under the following conditions:

  1. Use limited to natural terrain Motocross (no man-made jumps), Enduro and Dirt track competitions only.
  2. Exhaust systems may be modified or changed.
  3. External gearing and carburetor jetting may also be altered.
  4. No other modifications are allowed.
17.9.1.6 4-stroke 150cc motocross-type machines may compete against 85cc 2-stroke machines in Junior competition.

17.9.2 Junior Endorsements

17.9.2.1 Endorsements will be issued for:

  1. Off Road 50cc
  2. Off Road 65cc 2-stroke/125cc 4-stroke
  3. Off Road 85cc 2-stroke/150cc 4-stroke
  4. Off Road 200cc 2-stroke
  5. Off Road 250cc 4-stroke

17.10 GENERAL RULES

17.10.1 Homologation

17.10.1.1 For any competition, MA may require that any machine, or any part of a machine, including tyres, be homologated. For homologation details contact MA.

17.10.2 Helmet Cameras

17.10.2.1 Helmet cameras may be fitted providing the mounting to the helmet will allow the camera to detach if impacted upon and the attachment method must not impair the integrity or operation of the helmet.

17.10.3 Fees

ACTIVITY

FEE $ (INC GST)

Replacement licence 25.00
Protest Lodgement 70.00
Appeal to State Controlling Body lodgement 500.00
Appeal to MA lodgement 1000.00
Fuel Homologation fee – First year 2500.00
Fuel Homologation fee – Subsequent years 2000.00
All other fees Apply at MA office

17.11 PROTECTIVE CLOTHING AND HELMETS

17.11.0.1 No competitor may practice, start or compete in any Enduro or Reliability Trial competition unless wearing the following protective equipment and clothing.

17.11.1 Helmets

17.11.1.1 An approved and correctly fitting helmet (see Appendix B: Helmet Fitting Guide) which must:

  1. Carry the Standards Association of Australia “AS 1698” label, or Carry a label or mark certifying compliance to Australian Standard AS1698 issued by an accredited certifier; or
  2. Be approved under FIM Technical Rules.

17.11.2 Approval Labels for Helmets

17.11.2.1 Helmets must carry one of the following approval labels:
a) Europe ECE 22 – 05 ‘P’,’NP‘ or ‘J’ [Label affixed inside the helmet]
b) USA DOT Federal Standard No 218 / SNELL M2005, M2010, M2015
[Label affixed inside the helmet]
c) Japan JIS T 8133: 2007 [Label affixed inside the helmet]
d) Australia Standards Association of Australia AS1698

17.11.3 International Helmet Standards

Refer also www.fim.ch.
17.11.3.1 ECE 22 – 05 ‘P’, ‘NP‘ or ‘J’ [EUROPE]
The ECE mark consists of a circle surrounding the letter E followed by the distinguishing number of the country which has granted approval, as follows:
E1 Germany E2 France E3 Italy
E4 Netherlands E5 Sweden E6 Belgium
E7 Hungary E8 Czech Republic E9 Spain
E10 Yugoslavia E11 United Kingdom E12 Austria
E13 Luxembourg E14 Switzerland E15 not assigned
E16 Norway E17 Finland E18 Denmark
E19 Romania E20 Poland E21 Portugal
E22 Russian Federation E23 Greece E24 Ireland
E25 Croatia E26 Slovenia E27 Slovakia
E28 Bielo Russia E29 Estonia E30 not assigned
E31 Bosnia & Herzegovinia E32 Latvia E33 not assigned
E34 Bulgaria E35 not assigned E36 not assigned
E37 Turkey E40 Macedonia E43 Japan
E44 not assigned E45 Australia E46 Ukraine
E47 South Africa E48 New Zealand E49 not assigned

Below the letter E the approval number should always begin with 05. Below the approval number is the serial production number [Label is on retention system or comfort interior]

17.11.4 Clothing

17.11.4.1 Trousers of:

  1. Leather,
  2. Nylon lined motocross type,
  3. Padded denim motocross type,
  4. Reinforced padded nylon,
  5. Padded waterproof waxed cotton

    when worn so that no part of the body is uncovered when the competitor is in the normal racing position.

17.11.4.2 Trousers of other than leather must be non-combustible and be fitted with a lining.
17.11.4.3 A riding top of:

  1. Leather, or
  2. Close knit fabric of natural or synthetic fibre; or
  3. Waxed cotton

    which leaves no part of the body uncovered when the competitor is in the normal riding position

17.11.4.4 Or a one-piece suit of leather, reinforced nylon, or waxed cotton

17.11.5 Footwear

17.11.5.1 Boots which must be:

  1. Of recognised Motocross type,
  2. Constructed of leather, plastic or other similarly durable material, and
  3. Of a length that must at least cover ¾ of the length of the lower leg, with the rider in a racing position on the machine.

17.11.6 Gloves

17.11.6.1 Gloves of leather or other material of similar or greater durability.

17.11.7 Goggles and Visors

17.11.7.1 Eye protection, including spectacles, protective goggles, and/or helmet visors must be worn provided:

  1. Eye protectors and spectacles are made of non-shattering material,
  2. Eye protectors which cause visual disturbance are not to be used,
  3. Metal or Perspex face shields are not used,
  4. Eye shades or peaks are of a flexible material.
17.11.7.2 Tear-offs on goggles are not permitted for Enduro events.
17.11.7.3 A competitor must, at the start of the event and each special test, be wearing goggles or a similar form of eye protection. It is strongly recommended that the competitor wear the eye protection at all times during the event. Where the competitor removes their eye protection during the course of an event, they do so entirely at their own risk.

17.11.8 Hair and Jewellery

17.11.8.1 It is recommended that hair longer than shoulder length be confined in the helmet or jacket. Where the competitor chooses not to confine their hair as described, they do so entirely at their own risk.
17.11.8.2 It is recommended that body jewellery is removed or securely covered with tape prior to competition. Where the competitor chooses not to remove or securely cover jewellery with tape, they do so entirely at their own risk.

17.11.9 Footwear in pits

17.11.9.1 Closed footwear must be worn in any fuel control area, pit area, start area, work area or parc fermé at all times.

17.11.10 Junior Clothing

17.11.10.1 In addition to the general requirements for clothing, Juniors must comply as follows:

  1. Protective clothing must not be loose or flapping,
  2. Commercially manufactured body armour must be worn. Soft roost protection is not permitted.

17.12 MACHINE AND RIDER IDENTIFICATION

17.12.1 Number Plates

17.12.1.1 For all competitions three number plates must be fitted: one at the front and one on each side.
17.12.1.2 Number plates must:

  1. Where they are not an integral part of the machine or streamlining and are under 1.6mm in thickness, have rolled or wired edges,
  2. In the case of rectangular plates, have the corners formed to a 38mm radius,
  3. In the case of bolt on number plates, be made from a rigid material with minimum dimensions of 235mm height and 285mm width; and
  4. In the case of sidecars, be positioned so that they are visible from the front and each side of the sidecar.
17.12.1.3 Front number plates must have figures which are clearly visible at a distance of 20 metres and a solid 10mm wide border.
17.12.1.4 Side number plates must:

  1. Be fitted above a horizontal line drawn through the rear axle,
  2. Be fitted so that the front edge of the plate is behind a vertical line drawn at 200mm to the rear of the rider’s footrest.
17.12.1.5 Number backgrounds on side number plates may be an integral part of the rear seat section or fairing.
17.12.1.6 Advertising must be at least 25mm clear of the background of a number plate unless the advertising is an integral part of the back plate cover.
17.12.1.7 Advertising is permitted on all machines, but must be at least 25mm clear of the number plate background and the rider’s name by either a gap or a contrasting colour strip.

17.13 RACE MEETING PROTOCOLS: GENERAL

17.13.1 Flags and Signals

17.13.1.1 The minimum dimensions of all flags must be 500mm x 500mm.
17.13.1.2 Track flags and signals have the following meanings:

FLAG SIGNAL

MEANING AND REQUIREMENT OF COMPETITOR

National flag dropped or raised Start
Red flag displayed Race or practice stopped prematurely. Competitors must slow down, must not overtake and must slowly proceed to the parc fermé, pits, or other area indicated to them by officials. The red flag will also be used to signal the end of a demonstration
Black flag held stationary and black board with rider’s number Competitor with number indicated on black board must stop at the pits on the next lap
Yellow flag held stationary Danger, ride slowly, overtaking is forbidden
Yellow flag waved Immediate danger, slow down, prepare to stop, overtaking forbidden
No Jump Light Danger, overtaking forbidden, jumping forbidden
White flag waved Slow moving intervention vehicle on track
Blue flag held stationary Overtaking signal warning that competitor is soon to be overtaken
Blue flag waved Overtaking signal warning that rider is about to be overtaken
Green flag held stationary Course Clear
Last lap board The last lap of the race is about to commence
Black and white chequered flag waved Finish of Race, Practice session or Qualifying

17.13.2 Measurement of Engines

17.13.3 Measurement at Meetings

17.13.3.1 A Steward of a meeting may direct the measurement of the capacity of the engine of any machine, to be carried out at the conclusion of the meeting. Until the measurement is completed the machine must remain under the control of the relevant controlling body.
17.13.3.2 If an engine is measured at the request of a rider or entrant, the rider or entrant is liable for the cost of the measurement.
17.13.3.3 If an engine is measured for the purposes of a protest, the protesting party must submit a $500 bond. This bond will be refunded in full if the measured engine is found to be illegal. If the measured engine is found to be legal any reasonable costs in reassembly up to a maximum of $500 will be deducted and the remaining bond returned to the protesting party.

17.13.4 Measurement: Australian and State Championship Events

17.13.4.1 For all Australian and State championship events:

  1. All machines must have provision for the placement of sealing wire,
  2. An entrant may request that the entrant’s machine be measured and sealed before the event. As soon as practicable after receiving the request the measurer for the event must measure and seal the machine. Any machine examined under this sub-rule may, on application by the entrant, at the discretion of the measurer, be exempted from further examination at the event,
  3. The first, second, third and fourth placed machines must be impounded for a period of 30 minutes immediately following the event, pending any protest, and the event result will be provisional,
  4. At the conclusion of that period, if no protest is received, the result will be final,
  5. If the machines are to be ridden in another event within that period, they must be sealed before being returned to the competitor for that event,
  6. If no protest is received within that period, the seals may be removed,
  7. Any machine sealed as the result of a protest may only be measured by a measurer. All measurer’s reports, together with the seals, must be delivered to the relevant controlling body within 21 days after the event,
  8. No prize monies may be paid until measurer’s reports and seals are received or the expiration of 21 days whichever occurs first.

17.13.5 Description of Australian Off Road Championships

17.13.5.1 The Australian Off Road Championships will be decided over a series of events from the Enduro discipline. These may include Enduro, Sprint, Cross Country and Enduro Sprint. The number of rounds will be prescribed in the series supplementary regulations.

17.13.6 Cross Country

Race Meeting Protocols
17.13.6.1 These rules are additional to and/or exceptions to current Enduro rules. All other Enduro rules apply in this form of the discipline unless modified by State Controlling Body bylaws or the event supplementary regulations.
17.13.6.2 Cross Country is an off road, natural terrain, continuous multi-lap event with each lap being between 10kms and 20kms in length. For State and AORC events the intended lap time should be greater than 20 minutes. The rider or team in each class completing the most laps in the least elapsed time will be declared the winner of the class.
17.13.6.3 Cross Country events may be run over:

  1. A specified number of laps, or
  2. A specified length of time.
17.13.6.4 Cross Country events must:

  1. Start with riders lined up in single rows,
  2. Have a maximum of 40 riders per row,
  3. Start only one row at a time,
  4. Have a minimum of one minute between rows starting.
17.13.6.5 Prior to competition there may be an escorted preliminary lap of the course.
17.13.6.6 Outside mechanical assistance is permitted in areas designated by the organiser (including receiving tools and parts).
17.13.6.7 Riders completing less than 50% of the time/distance of the winner of the race will be classified as ‘Did Not Finish’ (DNF).

17.13.7 Cross Country Pony Express

Race Meeting Protocols
17.13.7.1 Pony Express is a form of Cross Country racing in which usually riders participate under the following conditions:

  1. Two riders and two machines,
  2. Two riders and one machine,
  3. Ironman Class – one rider and one machine.

17.13.8 Sprint

Race Meeting Protocols
17.13.8.1 These rules are additional to and/or exceptions to current Enduro rules. All other Enduro rules apply in this form of the discipline unless modified by state controlling body by-laws or the event supplementary regulations.
17.13.8.2 Sprint is an off road, natural terrain event consisting of a number of heats of a short course. Each heat is set along the lines of an Enduro Special Test. The rider in each class with the least total elapsed time will be declared the winner of the class.
17.13.8.3 Sprint heats will adhere to Enduro rules for timed tests (GCR 17.14.14).
17.13.8.4 The Clerk of Course will confirm the number of heats to be run on the day as soon as practical after the end of the first heat.
17.13.8.5 To be considered a finisher, riders must start all heats and complete at least 75% of the heats.
17.13.8.6 A rider who does not complete a heat will be awarded the slowest heat time in their class plus 100 seconds.
17.13.8.7 In National and Open Competitions a rider is only permitted to enter one class of the event.
17.13.8.8 Multiple entry of one machine in the same class is not permitted.
17.13.8.9 Full mechanical assistance is permitted in areas designated by the organiser.
17.13.8.10 A Cross Country Sprint may include a timed enduro loop between each heat.
17.13.8.11 Prior to competition there will be an escorted preliminary lap of the sprint.

17.13.9 Change of Machine During a Competition

17.13.9.1 During any competition, other than an attempt at a record, no machine may be exchanged for another unless permitted under these Rules or any supplementary regulations.

17.13.10 Scoring

17.13.10.1 Points to be allocated to competitor finishing order as follows:

PLACE

POINTS

PLACE

POINTS

1 25 11 10
2 22 12 9
3 20 13 8
4 18 14 7
5 16 15 6
6 15 16 5
7 14 17 4
8 13 18 3
9 12 19 2
10 11 20 1
17.13.10.2 An alternative points scoring system may be approved for an MA series event.
17.13.10.3 If a tie on points occurs for any position in an event which is conducted over more than one leg, the tying competitor who has the higher finishing position in the final leg of the event will be awarded the position.
17.13.10.4 If a tie on points occurs for any position in a series, the tying competitor who has the greatest number of higher placings in the series will be awarded the position.

17.14 RACE MEETING PROTOCOLS: ENDURO

17.14.1 Enduro Flags

17.14.1.1 For Enduros, flags will have the following meanings:

  1. White flags displayed on pegs- Entry to fuel control: Time check 200 metres,
  2. Yellow flags displayed on pegs- Time check 20 metres,
  3. Blue flags displayed on pegs- Route check approximately 200 metres,
  4. White flag with Black Cross displayed on pegs – No service time check approximately 70 metres,
  5. Green Flag displayed on pegs – Exit from time check.

17.14.2 Enduro Courses

17.14.2.1 Courses must be clearly marked.
17.14.2.2 Each course must:

  1. Have time check points which must:
    1. Have a digital clock showing hours minutes and seconds at the control table,
    2. Have a check list showing arrival time of each competitor in the time check,
    3. Be placed at the entrance to the parc fermé for the start and finish of each day of the event,
    4. Be placed at intermediate points selected by the Promoter and indicated on the itinerary,
    5. Preferably be no less than five nor more than 35 kilometres apart,
    6. Be indicated by:
      1. White flags placed 200 metres, and
      2. Yellow flags placed 20 metres before the control table, and
      3. Green flags placed two metres after the control table,
      4. Flags placed on both sides of the course so as to be clearly visible to the competitors.
17.14.2.3 Each course may:

  1. Have route check points which:
    1. Need not be marked on the route card,
    2. Must be indicated by blue flags placed on either side of the course 200 metres before the route check,
    3. Have a check list of the progress of each competitor.
  2. Have time check points with no service which:
    1. Will display a white flag with a black cross on both sides of the track 70 metres before the control table.
17.14.2.4 For multi-day events each course may have:

  1. A final service area before the final time check point,
  2. Before the final service area, a pre-finish time check, which is a no service time check.

    After which competitors have 15 minutes to reach the final time check.

17.14.2.5 The area between the yellow and green flags is considered parc fermé concerning access.

17.14.3 Entries

17.14.3.1 After the closing date for entries:

  1. A competitor may apply in writing to the Race Secretary for permission to change machines, and be entered in the relevant class,
  2. A team may apply in writing to the Race Secretary for permission:
    1. For a team member to change machines and be entered in the relevant class,
    2. To substitute one entered team member for another.
17.14.3.2 The Race Secretary may grant permission subject to such conditions as he or she thinks fit or may refuse permission.
17.14.3.3 A competitor who is substituted may not compete without the permission of the Race Secretary.
17.14.3.4 No team or competitor may change the capacity of an entered machine.
17.14.3.5 Applications must be delivered to the Race Secretary before the preliminary machine examination.

17.14.4 The Starting Area

17.14.4.1 The starting area may:

  1. Contain a parc fermé to which all access and egress is controlled and which connects directly to the working area,
  2. Contain a working area from which there is only one exit to the starting enclosure and where machine maintenance may be carried out,
  3. Contain a starting enclosure at one end of which is the starting line and in which the competitors await the starting signal,
  4. Be secured by fencing or otherwise regulated as to access so as to prevent the entry of unauthorised persons,
  5. Be in the charge of officials who are clearly identified,
  6. Have its entrance and exit clearly marked.
17.14.4.2 No competitor or person other than:

  1. The Steward,
  2. The Clerk of Course, or
  3. Any other official in charge thereof, may enter the starting area unless authorised by a relevant official or otherwise for purposes permitted under these Rules.
17.14.4.3 The supplementary regulations may prescribe the time for delivery of machines into the starting area before the start of an event and thereafter machines must:

  1. Remain in the starting area until the start,
  2. Be returned at the end of each day for detention overnight,
  3. Be released in time for the start of the next day,
  4. Be in the open air and not covered in any manner.

17.14.5 Preliminary Examination

17.14.5.1 Before each event, there must be a preliminary examination of competing machines.
17.14.5.2 At the preliminary examination, each machine may be tested for noise and marked if it does not exceed the prescribed noise emission levels.
17.14.5.3 At the conclusion of the preliminary examination each machine must be delivered into the parc fermé. No motorcycle may enter parc fermé without a stand approved at machine examination.
17.14.5.4 An event commences at the conclusion of the preliminary examination.

17.14.6 Starting Order and Numbers

17.14.6.1 The starting order of groups or classes will be as determined by the supplementary regulations.
17.14.6.2 The starting numbers of riders will be determined by a draw for each class.

17.14.7 Starting Procedures

17.14.7.1 The start signal for each competitor must be given as nearly as practicable to that competitor’s scheduled starting time.
17.14.7.2 It is not permitted to start the engine in:

  1. The parc fermé, working area, or
  2. The starting area before the starting signal is given.
17.14.7.3 Within one minute of the signal being given, the competitor must:

  1. Start the engine at the starting line using the machine’s kick starter or starter motor,
  2. Cross a second line 20 metres from the starting line under engine power.
17.14.7.4 A competitor who arrives at the starting line more than one minute late for that competitor’s allocated starting time:

  1. Will lose 60 points for every minute late,
  2. Must be allocated a new start time which must be the indicated time of arrival at the starting line ignoring seconds,
  3. Must comply with standard starting procedures,
17.14.7.5 If the competitor is more than 60 15 minutes late, they will be excluded for the day.
17.14.7.6 On each day of the event, competitors may enter the parc fermé 15 minutes before their starting times and move their machines by hand to the entry to the work area.
17.14.7.7 Competitors may have 10 minutes before their starting times to carry out machine preparation.

17.14.8 Event Procedures

17.14.8.1 For Enduros, the total time for the day of competition must not exceed 71/2 hours, including the 15 minutes at the final time check.
17.14.8.2 Competitors must at all times during the event:

  1. Remain on the course,
  2. Follow the competition direction.
17.14.8.3 At the beginning or end of a lap, a section or day, the Clerk of Course, due to weather or other conditions, may:

  1. Declare a section of the course to be impassable and in that event:
    1. That section will cease to be part of the course, and
    2. Any penalties incurred in that section will not be taken into account in scoring for the event.
  2. Change the time schedule for the section to a slower schedule.
17.14.8.4 Each competitor must be allocated a starting time and a time for each section between time checks.
17.14.8.5 The recorded arrival time for each competitor in a section is the starting time for that competitor in the next section.
17.14.8.6 During an event the competitor must have all marked parts on the motorcycle at all times when on the course, subject to GCR 17.14.11.
17.14.8.7 During an event, a competitor must not stop between the yellow flags and the control table.
17.14.8.8 A competitor may pass the final time check at the entrance to the parc fermé early, without penalty.
17.14.8.9 When the machine is placed in the parc fermé it must be completely equipped with all the marked parts.
17.14.8.10 At the end of any event there may be a final examination at which any of the machines may be impounded for examination.
17.14.8.11 If a competitor can convince the Jury he was delayed by abnormal circumstances outside his control, (e.g. providing assistance to an injured competitor), an allowance may be granted. Alleged baulking by another competitor is not an abnormal circumstance.
17.14.8.12 When the case of a rider is under discussion he may continue in the event until the jury makes the final decision.

17.14.9 Restarts

17.14.9.1 A competitor who retires, or is excluded from an event for a day:

  1. For multi-day events, may restart in the competition on following days from the rear of the field,
  2. For single day events, or if the competitor is excluded or retires for a second time from a multi-day event, may not continue on the course.
17.14.9.2 To be eligible to restart, a competitor must deliver the machine to the parc fermé at least 60 minutes before the amended start time.

17.14.10 Time Cards, Route Cards and Itinerary

17.14.10.1 Each competitor must stop at all time-checkpoints and route checkpoints.
17.14.10.2 Time cards must be issued and route cards may be issued:

  1. For the first day, at the preliminary examination,
  2. For all other days, as competitors leave the parc fermé at the end of the previous day.
17.14.10.3 Time cards:

  1. Must be presented at each control table, or, on demand, to an official,
  2. Must be handed in at the end of each day to the final control official,
  3. Must not be altered or obliterated by any competitor,
  4. Must not be exchanged between competitors,
  5. Must, in the event of loss, be replaced by the official in charge of the next time control,
  6. May show the prescribed running time for each section.
17.14.10.4 Route cards:

  1. Must be presented at all route checks,
  2. Must be handed in at the end of each day to the final control official,
  3. Must not be altered or obliterated by any competitor,
  4. Must not be exchanged between competitors,
  5. Must, in the event of loss, be replaced by the official in charge of the next time control.
17.14.10.5 Itineraries:

  1. Must be issued at the preliminary examination or displayed prominently in the starting area,
  2. Must clearly indicate all competition distances and show the prescribed running time for each section,
  3. Must contain samples of signs or indicators used for course markings,
  4. Are, for all purposes connected with the competition, deemed to be accurate.

17.14.11 Maintenance, Repair, Alteration and Refuelling

17.14.11.1 A machine may be cleaned, altered, repaired or refuelled during an event as follows:

  1. Subject to sub-Rule b), assistance is not permitted during the course of an event,
  2. A competitor may receive assistance for the following:
    1. Refuelling,
    2. Removing, replacing and replenishing:
      1. Coolant,
      2. Engine and gearbox lubricating oils and removal and replacement of oil filters.
    3. Removing air from the braking circuit,
    4. Inflating tubes and tyres.
    5. Cleaning number plates and plastic parts of the motorcycle with the aid of a sponge or cloth.
  3. No work on the machine may take place:
    1. In any tent, vehicle or other enclosed place,
    2. In the parc fermé,
    3. In the time check area.
  4. The rider is allowed to change any unmarked parts anywhere on the course but may receive spare parts and tools only in the servicing areas.
  5. A competitor may not receive or use the following tools:
    1. Any form of welding equipment other than for repairs to the exhaust system,
    2. Pressure cleaning apparatus,
    3. Electrical and air powered tools operated by remote connection.
  6. A competitor may, for the purposes of carrying out alterations or repairs, receive spare parts:
    1. In the working area in the starting area,
    2. Between the white and yellow flags adjacent to a time check point.
  7. A competitor may leave used parts where the alterations or repairs were carried out.
    1. A rider wishing to repair or replace the silencer of his machine can do so at the end of the day, after the last time check and before entering the parc fermé. The work must be carried out under the supervision of an official.
    2. The rider will be allowed an extra time of 60 minutes for this work.
    3. The same applies to riders who for any reason have been told by the Clerk of the Course to have their machines noise tested.
    4. The rider may request as many noise tests as he wishes during the 60 minutes allowance.
    5. After 60 minutes have elapsed, the rider will be required to present his machine to the noise control test official for testing. If the noise level is above the required standard, the rider will be disqualified (or other penalties given as provided for in the GCRs).
    6. If the silencer is changed during the day, the rider must present it to be noted at the next time check point. At the end of the day, a noise control test will be carried out during the 60 minutes allowance. If the test is passed, the silencer will be marked with the official paint. If not, the rider may be excluded (or other penalties given as provided for in the GCRs.)
  8. The engine must be stopped during refueling,
  9. The rider must dismount from the motorcycle during refueling,
  10. An environmental mat or other effective device is required to be used when refueling, replenishing all oils and chemicals (including the oiling of chains) in order to stop ground contamination. The minimum dimensions of the mat or other effective devices must be at least 500mm x 500mm. The penalty for non-compliance may be discretionary. From 1st January 2016, minimum specifications of the enviromat will be as follows: dimensions minimum 160cm x 100cm; absorption capacity minimum 1 litre; thickness minimum 5mm.
  11. No fuel may be carried other than in a tank or container permanently attached to the machine,
  12. Unless otherwise stated in the supplementary regulations, replacement of any fluids except water or coolant is only permitted in the work area and at a time check between the white and yellow flags where service is permitted,
  13. There must be at least one refueling depot every 50 km.
  14. Tyres may only be changed:
    1. At the final service area,
    2. In the work area at the start.

17.14.12 Assistance

17.14.12.1 All outside assistance is forbidden, other than the normal assistance given at the official time checks.
17.14.12.2 The term “outside assistance” refers to the act involved when any person, other than the rider or an official performing his duties, comes into contact with the motorcycle.
17.14.12.3 No machine may be moved otherwise than by:

  1. Its engine, or
  2. The actions of its rider.
17.14.12.4 No competitor may be accompanied anywhere on the course.
17.14.12.5 The term “accompanied” refers to the act of riding in company for the purpose of receiving assistance, with any person other than a registered official of the event in the course of their duties.
17.14.12.6 In any replenishment area, the chain can be lubricated but only the rider is allowed to do this work.

17.14.13 Inspection and Marking

17.14.13.1 At any time check a relevant official:

  1. Must record the time as displayed on the clock when the competitor’s time card is presented,
  2. May inspect any machine,
  3. May mark any part,
  4. May direct the alteration of any machine which does not comply with any requirement of these Rules or the supplementary regulations,
  5. May direct the administration of any noise or other test,
  6. May report any competitor or machine to the jury or a key official.
17.14.13.2 Any competitor required to submit to a noise test under the preceding Rule:

  1. May request further tests during the 30 minutes next after the completion of the initial test,
  2. May be required, at the expiration of that time, to submit to a further test,
  3. May not continue in the event if, at the expiration of that time, the machine does not comply with the prescribed noise emission levels.

17.14.14 Timed Tests

17.14.14.1 Timed tests must be as follows:

  1. Average speed must not exceed 50 km/h.
  2. Competitors may inspect test courses on foot but not by wheeled vehicle,
  3. Be safe and of a reasonable degree of difficulty,
  4. For multi-day events, be marked not less than 48 hours before the scheduled start time for the test,
  5. A rider who leaves the test course and gains an advantage may incur penalties as in GCR 7.1.6.

17.14.15 Cross Tests and Enduro Tests

17.14.15.1 Cross tests and Enduro tests must be as follows:

  1. Cross test courses must:
    1. Be between two and five kilometres in length,
    2. Be specially prepared for the test,
    3. Have safety zones at all bends and other places of potential danger to spectators, with a minimum width of one metre to which spectators have no access,
    4. Start within one kilometre of a time check point,
    5. Have the start and finish line in the same vicinity.
  2. Enduro test courses must:
    1. Be readily accessible to a four-wheel drive vehicle,
    2. Be on a section of the course between two time checks,
    3. Be between three and 10 kilometres in length,
    4. Be untimed during the first lap and timed during subsequent laps,
    5. For multi-day events, an Enduro test which is ridden on previous days and repeated in the same direction on future days may be timed on the first lap of these subsequent days.
  3. Each competitor must:
    1. Start with the engine running,
    2. Come to a stop at the start line, as directed by an official, and start within 10 seconds after being directed by the official,
    3. The riders start time will be the moment the front wheel moves past the recording device or at the expiration of the 10 seconds.
  4. More than one test may be run on the same course in each day,
  5. Tests must have flying finishes with each competitor’s time being recorded at the point of crossing the finish line,
  6. Competitors may inspect special test courses on foot,
  7. As each competitor finishes they must resume the principal course without stopping.

17.14.16 Final Test

17.14.16.1 At the end of an event there may be a final test which must be a closed circuit with a minimum of five laps and a maximum of 10 laps covering a total distance of between 10 and 18 kilometers.
17.14.16.2 Before the start of the test all machines must be delivered to a parc fermé.
17.14.16.3 Prior to competition, there will be a voluntary escorted preliminary lap of the course.
17.14.16.4 Tests will be divided into groups based on classes.
17.14.16.5 Should a competitor finish the road test late, the competitor may be transferred to another group.
17.14.16.6 Restart competitors must not compete in a test with competitors who are still in the competition. They may compete in a separate test if one is scheduled by the organisers
17.14.16.7 For multi-day events, massed starts must be used with grid positions determined by placings at the end of the previous day.
17.14.16.8 For one-day events, grid positions must be allocated by the Promoter.
17.14.16.9 At the conclusion of the prescribed number of laps by the leading rider, the chequered flag will be shown. From the time the race winner takes the chequered flag five minutes will be allowed for other riders to complete the lap they are on, after which the test is over.

17.14.17 Finish of Event

17.14.17.1 All finishing machines may be impounded for 30 minutes.
17.14.17.2 For each machine an event finishes:

  1. If there is a final examination, at the conclusion of the examination of the machine,
  2. If there is no final examination, at the moment the machine arrives at the final time check.
17.14.17.3 A rider is considered to have finished the Enduro when he has passed the final time check of the event. Failure to complete the final speed test (if applicable) will incur the maximum penalty as per Rule 17.14.18.

17.14.18 Enduro Penalties

17.14.18.1 Penalty points are incurred as follows:

PENALTY

POINTS

Late arrival at the start line 60 points per minute
Not crossing the 20m line under power within time 10 points
Early and late arrival at a time check 60 points per minute
Stopping between yellow flags and control table at time check 60 points
Starting of engine in starting area prior to start signal 60 points
Starting the engine in the parc fermé or work area 120 points
Uncompleted day for a competitor 7,200 points
Special tests – for each 1/100 sec 1/100 point
Final test – for each uncompleted lap plus the time of the slowest completed test time in the same class 60 points
Individuals who restart – per day plus points for completed special tests 7200 points

17.14.19 Classification of Individuals and Teams

17.14.19.1 For individual classification, the time obtained each day will be added for each rider in each class and in each category. The rider with the total lowest time will be placed first and so on.
17.14.19.2 For individuals, daily penalty points will be accumulated.
17.14.19.3 For teams:

  1. For the team classification, the times obtained by each team rider will be added together to form the daily time of the team. The team with the total lowest time will be placed first and so on,
  2. Daily penalty points will be accumulated.
17.14.19.4 Where a competitor is a member of a team:

  1. The team will incur 7,200 penalty points for each day of the event that that rider does not complete.
  2. If the competitor is permitted to restart after exclusion for a day, the team will incur 7,200 points for the day the competitor was excluded plus 7,200 for each following day.

17.14.20 Exclusion from an Event

17.14.20.1 A competitor is liable to be excluded from an event for any of the following acts during the event:

  1. Competing on a machine with an engine capacity different from that stated on the entry form,
  2. Receiving spare parts or tools anywhere on the course except the service areas. (i.e. The working area and at time checks between the white and yellow flags),
  3. Replacing any marked part without authorisation,
  4. Failing to have all marked parts on the motorcycle at all times when on the course, subject to GCR 17.14.11.
  5. Placing the motorcycle in the parc fermé without all the marked parts.
  6. Without authorisation, entering the parc fermé other than to collect or deliver the machine,
  7. In the parc fermé:
    1. Touching any other competitor’s machine,
    2. Touching his or her machine other than for purposes of collection or delivery,
  8. Smoking in the parc fermé, working area, or between the white and yellow flags,
  9. Placing the machine in the parc fermé more than two hours after the competitor’s scheduled finishing time,
  10. Without authorisation, placing the machine in any tent, vehicle or other enclosed place,
  11. Carrying fuel on a machine other than in a permanently attached tank or container,
  12. Not stopping the engine during refueling,
  13. Without authorisation:
    1. Communicating with accompanying persons,
    2. Being accompanied by another competitor,
    3. Accompanying another competitor.
  14. Not observing traffic regulations,
  15. Knowingly failing to hand in time cards at the finish of each day,
  16. Altering a time card or route card or using another rider’s card,
  17. Practicing on the special test course,
  18. Inspecting the special test course other than on foot,
  19. Riding against the direction of the course,
  20. Competing on a machine the engine of which exceeds the maximum capacity of the entered class.

17.14.21 Exclusion for a Day

17.14.21.1 A competitor is liable to be excluded for the day from an event if, during that day, they do any of the following:

  1. Failing to pass a noise control test,
  2. Refueling outside refueling areas,
  3. Failing to deposit the machine in the parc fermé forthwith after the final check-in of the day,
  4. Entering the parc fermé with the engine running,
  5. Receiving outside assistance other than for purposes of:
    1. Refueling,
    2. Removing, replacing and replenishing:
      1. Coolant,
      2. Brake fluids,
      3. Engine and gearbox lubricating oils and removal and replacement of oil filters.
    3. Inflating tubes and tyres.
  6. Arriving more than 15 minutes late for the start,
  7. Arriving more than 30 minutes late for a time check (the rider may opt to continue the event until the Clerk of Course makes a final decision).
  8. Moving the machine otherwise than by:
    1. Its engine, or
    2. The actions of the competitor.
  9. Riding off the course or against the course direction,
  10. Failing to get the time card and/or control check list marked at a time check,
  11. Missing a time check or a route check,
  12. Changing tyres other than:
    1. At the final service area, or
    2. In the working area in the start area.
  13. Receiving or using prohibited tools.
17.14.21.2 A competitor liable to the penalties prescribed in the two preceding Rules may apply to the Steward for a reduction in penalty. The Steward, on being satisfied that penalties were incurred in exceptional circumstances, may:

  1. Determine that no penalty should be imposed,
  2. Impose a lesser penalty.

17.14.22 Explanation of Results

17.14.22.1 A competitor may, no more than 24 hours after the publication of the results of any day’s run, request from the Clerk of Course an explanation of those results.

17.14.23 Junior Enduro Courses

17.14.23.1 Enduro courses for Juniors should have time checks no less than 5km and no more than 20km apart.
17.14.23.2 Enduro courses for Juniors must have one refueling stop every 35km.
17.14.23.3 For Junior Enduros the total time for the day of competition must not exceed four hours, including the 15 minutes at the final time check.

17.14.24 Junior Event Procedures

17.14.24.1 Junior riders may receive assistance starting their machine at the special test start line.
17.14.24.2 Junior riders may be given a new start time should they stall their machine on the start line.
17.14.24.3 Junior competitors may receive parts anywhere on the course.
17.14.24.4 Junior competitors may receive outside assistance anywhere on the course.

SECTION 17C: COMPETITION RULES


17.7 GENERAL ELIGIBILITY

17.7.1 General Eligibility

17.7.1.1 No person may participate in any competition, other than an Australian Championship, unless and until that person’s clothing and machine have been examined and approved by the Scrutineer for that competition.
17.7.1.2 No person may participate in an Australian Championship unless and until:

  1. That person’s clothing and machine have been examined and approved by the Scrutineer for that meeting, or
  2. If stipulated in Supplementary Regulations, the person provides the Scrutineer with a signed checklist that the clothing and machine have been self-scrutineered.
17.7.1.3 At scrutineering, competitors must produce documents or other evidence as required to verify engine and frame identity.
17.7.1.4 The onus of proving that a competitor, and the competitor’s machine and clothing, are eligible to compete, is on the person seeking to prove it.
17.7.1.5 Where any Rule prohibits the modification of any machine or class of machines, that machine or that class will be deemed to have been modified if any part or parts thereof have been altered from the machine or class as manufactured by the machine manufacturer.
17.7.1.6 In the interpretation of any Rule relating to the design requirements for any machine or class of machines, reference may be made to relevant diagrams appearing in these Rules.

17.8 AUSTRALIAN OFF ROAD CHAMPIONSHIP ELIGIBILITY

17.8.1 Enduro Junior

17.8.1.1 Riders must be 19 years or under on the 1st January of the competition year. Machines may be of any capacity.

17.8.2 Veterans Class

17.8.2.1 Riders must have turned 35 years before 1st January in the year of competition. Machines may be of any capacity.

17.8.3 Masters Class

17.8.3.1 Riders must have turned 45 years before 1st January in the year of the competition. Machines may be of any capacity.

17.8.4 Womens Class

17.8.4.1 Women may ride machines of any capacity.
17.8.4.2 To constitute a class, there must be a minimum of six competitors entered and competing in the Womens class.
17.8.4.3 Should there be insufficient numbers in this class, the riders will be included in the appropriate capacity class.

17.8.5 All classes

17.8.5.1 Only solo machines are eligible for the Australian Off Road Championships.
17.8.5.2 All machines must comply with GCR 17.18.5 and 17.18.9.3.
17.8.5.3 An environment mat, or other effective device is required to be used when refueling, replenishing all oils and chemicals (including the oiling of chains) in order to prevent contamination of the ground. The minimum dimensions of the mat or other effective device must be at least 500mm x 500mm. The penalty for non-compliance may be discretionary.
17.8.5.4 No rider competing in the AORC event may compete at another event at the same venue on any of the eight days immediately preceding the AORC event.

17.9 JUNIOR ELIGIBILITY

17.9.1 General

17.9.1.1 No person who is under the age of 16 years may compete in other than a Junior competition.
17.9.1.2 In Junior competition,

  1. A rider’s age on 1st January will determine their age for competition purposes for that year,
  2. A rider may move to the next higher age class when they become eligible by reason of celebrating a birthday, but once the rider moves to that higher age class, they may not move back to the lower age class,
  3. Any points earned by the rider in the lower age class cannot be transferred when the rider moves to the higher age class,
  4. This GCR applies to all riders up to and including the age of 16 years.
17.9.1.3 No person who is unable to lift his or her machine unaided from the horizontal to the vertical may compete in any Junior competition.
17.9.1.4 Subject to GCR 17.9.1.2 a) a Junior who is under the age of 9 years may compete on a 50cc automatic machine notwithstanding that the Junior is unable to lift the machine unaided from the horizontal to vertical.

  1. Junior competitors in the age groups listed in the tables above may compete in the corresponding classes:
  2. No applicant will be issued with their first competition licence if they are under the age of 7 years,
  3. Unless otherwise permitted in writing by the Relevant Controlling Body, for any event there must be no greater age variation between competitors than 4 years,
  4. No participant in the 50cc automatic class may compete in any other class other than at Club level competitions,
  5. In the 4 years to Under 9 years 50cc Demo Class automatic non-competitive class, all riders are entitled to receive a prize or award of the same size/value,
  6. Subject to the following two GCRs, a Relevant Controlling Body may permit age group racing, graded racing, or a combination of both,
  7. Age group racing:
    1. Subject to sub-Rule ii), only competitors in the same age groups may compete against each other,
    2. Competitors from different age groups in the following classes may compete with each other if there are insufficient entries for each class:
      1. 85cc 2 stroke big wheels and 100cc – 150cc 4 stroke single cylinder,
      2. 100cc – 150cc single cylinder & 250cc 4 stroke,
  8. A Relevant Controlling Body may grade junior competitors according to their respective skills,
  9. Demo class is a non-competitive class.
17.9.1.5 4-stroke non-motocross type machines 80cc to 160cc are approved for competition under the following conditions:

  1. Use limited to natural terrain Motocross (no man-made jumps), Enduro and Dirt track competitions only.
  2. Exhaust systems may be modified or changed.
  3. External gearing and carburetor jetting may also be altered.
  4. No other modifications are allowed.
17.9.1.6 4-stroke 150cc motocross-type machines may compete against 85cc 2-stroke machines in Junior competition.

17.9.2 Junior Endorsements

17.9.2.1 Endorsements will be issued for:

  1. Off Road 50cc
  2. Off Road 65cc 2-stroke/125cc 4-stroke
  3. Off Road 85cc 2-stroke/150cc 4-stroke
  4. Off Road 200cc 2-stroke
  5. Off Road 250cc 4-stroke

17.10 GENERAL RULES

17.10.1 Homologation

17.10.1.1 For any competition, MA may require that any machine, or any part of a machine, including tyres, be homologated. For homologation details contact MA.

17.10.2 Helmet Cameras

17.10.2.1 Helmet cameras may be fitted providing the mounting to the helmet will allow the camera to detach if impacted upon and the attachment method must not impair the integrity or operation of the helmet.

17.10.3 Fees

ACTIVITY

FEE $ (INC GST)

Replacement licence 25.00
Protest Lodgement 70.00
Appeal to State Controlling Body lodgement 500.00
Appeal to MA lodgement 1000.00
Fuel Homologation fee – First year 2500.00
Fuel Homologation fee – Subsequent years 2000.00
All other fees Apply at MA office

17.11 PROTECTIVE CLOTHING AND HELMETS

17.11.0.1 No competitor may practice, start or compete in any Enduro or Reliability Trial competition unless wearing the following protective equipment and clothing.

17.11.1 Helmets

17.11.1.1 An approved and correctly fitting helmet (see Appendix B: Helmet Fitting Guide) which must:

  1. Carry the Standards Association of Australia “AS 1698” label, or Carry a label or mark certifying compliance to Australian Standard AS1698 issued by an accredited certifier; or
  2. Be approved under FIM Technical Rules.

17.11.2 Approval Labels for Helmets

17.11.2.1 Helmets must carry one of the following approval labels:
a) Europe ECE 22 – 05 ‘P’,’NP‘ or ‘J’ [Label affixed inside the helmet]
b) USA DOT Federal Standard No 218 / SNELL M2005, M2010, M2015
[Label affixed inside the helmet]
c) Japan JIS T 8133: 2007 [Label affixed inside the helmet]
d) Australia Standards Association of Australia AS1698

17.11.3 International Helmet Standards

Refer also www.fim.ch.
17.11.3.1 ECE 22 – 05 ‘P’, ‘NP‘ or ‘J’ [EUROPE]
The ECE mark consists of a circle surrounding the letter E followed by the distinguishing number of the country which has granted approval, as follows:
E1 Germany E2 France E3 Italy
E4 Netherlands E5 Sweden E6 Belgium
E7 Hungary E8 Czech Republic E9 Spain
E10 Yugoslavia E11 United Kingdom E12 Austria
E13 Luxembourg E14 Switzerland E15 not assigned
E16 Norway E17 Finland E18 Denmark
E19 Romania E20 Poland E21 Portugal
E22 Russian Federation E23 Greece E24 Ireland
E25 Croatia E26 Slovenia E27 Slovakia
E28 Bielo Russia E29 Estonia E30 not assigned
E31 Bosnia & Herzegovinia E32 Latvia E33 not assigned
E34 Bulgaria E35 not assigned E36 not assigned
E37 Turkey E40 Macedonia E43 Japan
E44 not assigned E45 Australia E46 Ukraine
E47 South Africa E48 New Zealand E49 not assigned

Below the letter E the approval number should always begin with 05. Below the approval number is the serial production number [Label is on retention system or comfort interior]

17.11.4 Clothing

17.11.4.1 Trousers of:

  1. Leather,
  2. Nylon lined motocross type,
  3. Padded denim motocross type,
  4. Reinforced padded nylon,
  5. Padded waterproof waxed cotton

    when worn so that no part of the body is uncovered when the competitor is in the normal racing position.

17.11.4.2 Trousers of other than leather must be non-combustible and be fitted with a lining.
17.11.4.3 A riding top of:

  1. Leather, or
  2. Close knit fabric of natural or synthetic fibre; or
  3. Waxed cotton

    which leaves no part of the body uncovered when the competitor is in the normal riding position

17.11.4.4 Or a one-piece suit of leather, reinforced nylon, or waxed cotton

17.11.5 Footwear

17.11.5.1 Boots which must be:

  1. Of recognised Motocross type,
  2. Constructed of leather, plastic or other similarly durable material, and
  3. Of a length that must at least cover ¾ of the length of the lower leg, with the rider in a racing position on the machine.

17.11.6 Gloves

17.11.6.1 Gloves of leather or other material of similar or greater durability.

17.11.7 Goggles and Visors

17.11.7.1 Eye protection, including spectacles, protective goggles, and/or helmet visors must be worn provided:

  1. Eye protectors and spectacles are made of non-shattering material,
  2. Eye protectors which cause visual disturbance are not to be used,
  3. Metal or Perspex face shields are not used,
  4. Eye shades or peaks are of a flexible material.
17.11.7.2 Tear-offs on goggles are not permitted for Enduro events.
17.11.7.3 A competitor must, at the start of the event and each special test, be wearing goggles or a similar form of eye protection. It is strongly recommended that the competitor wear the eye protection at all times during the event. Where the competitor removes their eye protection during the course of an event, they do so entirely at their own risk.

17.11.8 Hair and Jewellery

17.11.8.1 It is recommended that hair longer than shoulder length be confined in the helmet or jacket. Where the competitor chooses not to confine their hair as described, they do so entirely at their own risk.
17.11.8.2 It is recommended that body jewellery is removed or securely covered with tape prior to competition. Where the competitor chooses not to remove or securely cover jewellery with tape, they do so entirely at their own risk.

17.11.9 Footwear in pits

17.11.9.1 Closed footwear must be worn in any fuel control area, pit area, start area, work area or parc fermé at all times.

17.11.10 Junior Clothing

17.11.10.1 In addition to the general requirements for clothing, Juniors must comply as follows:

  1. Protective clothing must not be loose or flapping,
  2. Commercially manufactured body armour must be worn. Soft roost protection is not permitted.

17.12 MACHINE AND RIDER IDENTIFICATION

17.12.1 Number Plates

17.12.1.1 For all competitions three number plates must be fitted: one at the front and one on each side.
17.12.1.2 Number plates must:

  1. Where they are not an integral part of the machine or streamlining and are under 1.6mm in thickness, have rolled or wired edges,
  2. In the case of rectangular plates, have the corners formed to a 38mm radius,
  3. In the case of bolt on number plates, be made from a rigid material with minimum dimensions of 235mm height and 285mm width; and
  4. In the case of sidecars, be positioned so that they are visible from the front and each side of the sidecar.
17.12.1.3 Front number plates must have figures which are clearly visible at a distance of 20 metres and a solid 10mm wide border.
17.12.1.4 Side number plates must:

  1. Be fitted above a horizontal line drawn through the rear axle,
  2. Be fitted so that the front edge of the plate is behind a vertical line drawn at 200mm to the rear of the rider’s footrest.
17.12.1.5 Number backgrounds on side number plates may be an integral part of the rear seat section or fairing.
17.12.1.6 Advertising must be at least 25mm clear of the background of a number plate unless the advertising is an integral part of the back plate cover.
17.12.1.7 Advertising is permitted on all machines, but must be at least 25mm clear of the number plate background and the rider’s name by either a gap or a contrasting colour strip.

17.13 RACE MEETING PROTOCOLS: GENERAL

17.13.1 Flags and Signals

17.13.1.1 The minimum dimensions of all flags must be 500mm x 500mm.
17.13.1.2 Track flags and signals have the following meanings:

FLAG SIGNAL

MEANING AND REQUIREMENT OF COMPETITOR

National flag dropped or raised Start
Red flag displayed Race or practice stopped prematurely. Competitors must slow down, must not overtake and must slowly proceed to the parc fermé, pits, or other area indicated to them by officials. The red flag will also be used to signal the end of a demonstration
Black flag held stationary and black board with rider’s number Competitor with number indicated on black board must stop at the pits on the next lap
Yellow flag held stationary Danger, ride slowly, overtaking is forbidden
Yellow flag waved Immediate danger, slow down, prepare to stop, overtaking forbidden
No Jump Light Danger, overtaking forbidden, jumping forbidden
White flag waved Slow moving intervention vehicle on track
Blue flag held stationary Overtaking signal warning that competitor is soon to be overtaken
Blue flag waved Overtaking signal warning that rider is about to be overtaken
Green flag held stationary Course Clear
Last lap board The last lap of the race is about to commence
Black and white chequered flag waved Finish of Race, Practice session or Qualifying

17.13.2 Measurement of Engines

17.13.3 Measurement at Meetings

17.13.3.1 A Steward of a meeting may direct the measurement of the capacity of the engine of any machine, to be carried out at the conclusion of the meeting. Until the measurement is completed the machine must remain under the control of the relevant controlling body.
17.13.3.2 If an engine is measured at the request of a rider or entrant, the rider or entrant is liable for the cost of the measurement.
17.13.3.3 If an engine is measured for the purposes of a protest, the protesting party must submit a $500 bond. This bond will be refunded in full if the measured engine is found to be illegal. If the measured engine is found to be legal any reasonable costs in reassembly up to a maximum of $500 will be deducted and the remaining bond returned to the protesting party.

17.13.4 Measurement: Australian and State Championship Events

17.13.4.1 For all Australian and State championship events:

  1. All machines must have provision for the placement of sealing wire,
  2. An entrant may request that the entrant’s machine be measured and sealed before the event. As soon as practicable after receiving the request the measurer for the event must measure and seal the machine. Any machine examined under this sub-rule may, on application by the entrant, at the discretion of the measurer, be exempted from further examination at the event,
  3. The first, second, third and fourth placed machines must be impounded for a period of 30 minutes immediately following the event, pending any protest, and the event result will be provisional,
  4. At the conclusion of that period, if no protest is received, the result will be final,
  5. If the machines are to be ridden in another event within that period, they must be sealed before being returned to the competitor for that event,
  6. If no protest is received within that period, the seals may be removed,
  7. Any machine sealed as the result of a protest may only be measured by a measurer. All measurer’s reports, together with the seals, must be delivered to the relevant controlling body within 21 days after the event,
  8. No prize monies may be paid until measurer’s reports and seals are received or the expiration of 21 days whichever occurs first.

17.13.5 Description of Australian Off Road Championships

17.13.5.1 The Australian Off Road Championships will be decided over a series of events from the Enduro discipline. These may include Enduro, Sprint, Cross Country and Enduro Sprint. The number of rounds will be prescribed in the series supplementary regulations.

17.13.6 Cross Country

Race Meeting Protocols
17.13.6.1 These rules are additional to and/or exceptions to current Enduro rules. All other Enduro rules apply in this form of the discipline unless modified by State Controlling Body bylaws or the event supplementary regulations.
17.13.6.2 Cross Country is an off road, natural terrain, continuous multi-lap event with each lap being between 10kms and 20kms in length. For State and AORC events the intended lap time should be greater than 20 minutes. The rider or team in each class completing the most laps in the least elapsed time will be declared the winner of the class.
17.13.6.3 Cross Country events may be run over:

  1. A specified number of laps, or
  2. A specified length of time.
17.13.6.4 Cross Country events must:

  1. Start with riders lined up in single rows,
  2. Have a maximum of 40 riders per row,
  3. Start only one row at a time,
  4. Have a minimum of one minute between rows starting.
17.13.6.5 Prior to competition there may be an escorted preliminary lap of the course.
17.13.6.6 Outside mechanical assistance is permitted in areas designated by the organiser (including receiving tools and parts).
17.13.6.7 Riders completing less than 50% of the time/distance of the winner of the race will be classified as ‘Did Not Finish’ (DNF).

17.13.7 Cross Country Pony Express

Race Meeting Protocols
17.13.7.1 Pony Express is a form of Cross Country racing in which usually riders participate under the following conditions:

  1. Two riders and two machines,
  2. Two riders and one machine,
  3. Ironman Class – one rider and one machine.

17.13.8 Sprint

Race Meeting Protocols
17.13.8.1 These rules are additional to and/or exceptions to current Enduro rules. All other Enduro rules apply in this form of the discipline unless modified by state controlling body by-laws or the event supplementary regulations.
17.13.8.2 Sprint is an off road, natural terrain event consisting of a number of heats of a short course. Each heat is set along the lines of an Enduro Special Test. The rider in each class with the least total elapsed time will be declared the winner of the class.
17.13.8.3 Sprint heats will adhere to Enduro rules for timed tests (GCR 17.14.14).
17.13.8.4 The Clerk of Course will confirm the number of heats to be run on the day as soon as practical after the end of the first heat.
17.13.8.5 To be considered a finisher, riders must start all heats and complete at least 75% of the heats.
17.13.8.6 A rider who does not complete a heat will be awarded the slowest heat time in their class plus 100 seconds.
17.13.8.7 In National and Open Competitions a rider is only permitted to enter one class of the event.
17.13.8.8 Multiple entry of one machine in the same class is not permitted.
17.13.8.9 Full mechanical assistance is permitted in areas designated by the organiser.
17.13.8.10 A Cross Country Sprint may include a timed enduro loop between each heat.
17.13.8.11 Prior to competition there will be an escorted preliminary lap of the sprint.

17.13.9 Change of Machine During a Competition

17.13.9.1 During any competition, other than an attempt at a record, no machine may be exchanged for another unless permitted under these Rules or any supplementary regulations.

17.13.10 Scoring

17.13.10.1 Points to be allocated to competitor finishing order as follows:

PLACE

POINTS

PLACE

POINTS

1 25 11 10
2 22 12 9
3 20 13 8
4 18 14 7
5 16 15 6
6 15 16 5
7 14 17 4
8 13 18 3
9 12 19 2
10 11 20 1
17.13.10.2 An alternative points scoring system may be approved for an MA series event.
17.13.10.3 If a tie on points occurs for any position in an event which is conducted over more than one leg, the tying competitor who has the higher finishing position in the final leg of the event will be awarded the position.
17.13.10.4 If a tie on points occurs for any position in a series, the tying competitor who has the greatest number of higher placings in the series will be awarded the position.

17.14 RACE MEETING PROTOCOLS: ENDURO

17.14.1 Enduro Flags

17.14.1.1 For Enduros, flags will have the following meanings:

  1. White flags displayed on pegs- Entry to fuel control: Time check 200 metres,
  2. Yellow flags displayed on pegs- Time check 20 metres,
  3. Blue flags displayed on pegs- Route check approximately 200 metres,
  4. White flag with Black Cross displayed on pegs – No service time check approximately 70 metres,
  5. Green Flag displayed on pegs – Exit from time check.

17.14.2 Enduro Courses

17.14.2.1 Courses must be clearly marked.
17.14.2.2 Each course must:

  1. Have time check points which must:
    1. Have a digital clock showing hours minutes and seconds at the control table,
    2. Have a check list showing arrival time of each competitor in the time check,
    3. Be placed at the entrance to the parc fermé for the start and finish of each day of the event,
    4. Be placed at intermediate points selected by the Promoter and indicated on the itinerary,
    5. Preferably be no less than five nor more than 35 kilometres apart,
    6. Be indicated by:
      1. White flags placed 200 metres, and
      2. Yellow flags placed 20 metres before the control table, and
      3. Green flags placed two metres after the control table,
      4. Flags placed on both sides of the course so as to be clearly visible to the competitors.
17.14.2.3 Each course may:

  1. Have route check points which:
    1. Need not be marked on the route card,
    2. Must be indicated by blue flags placed on either side of the course 200 metres before the route check,
    3. Have a check list of the progress of each competitor.
  2. Have time check points with no service which:
    1. Will display a white flag with a black cross on both sides of the track 70 metres before the control table.
17.14.2.4 For multi-day events each course may have:

  1. A final service area before the final time check point,
  2. Before the final service area, a pre-finish time check, which is a no service time check.

    After which competitors have 15 minutes to reach the final time check.

17.14.2.5 The area between the yellow and green flags is considered parc fermé concerning access.

17.14.3 Entries

17.14.3.1 After the closing date for entries:

  1. A competitor may apply in writing to the Race Secretary for permission to change machines, and be entered in the relevant class,
  2. A team may apply in writing to the Race Secretary for permission:
    1. For a team member to change machines and be entered in the relevant class,
    2. To substitute one entered team member for another.
17.14.3.2 The Race Secretary may grant permission subject to such conditions as he or she thinks fit or may refuse permission.
17.14.3.3 A competitor who is substituted may not compete without the permission of the Race Secretary.
17.14.3.4 No team or competitor may change the capacity of an entered machine.
17.14.3.5 Applications must be delivered to the Race Secretary before the preliminary machine examination.

17.14.4 The Starting Area

17.14.4.1 The starting area may:

  1. Contain a parc fermé to which all access and egress is controlled and which connects directly to the working area,
  2. Contain a working area from which there is only one exit to the starting enclosure and where machine maintenance may be carried out,
  3. Contain a starting enclosure at one end of which is the starting line and in which the competitors await the starting signal,
  4. Be secured by fencing or otherwise regulated as to access so as to prevent the entry of unauthorised persons,
  5. Be in the charge of officials who are clearly identified,
  6. Have its entrance and exit clearly marked.
17.14.4.2 No competitor or person other than:

  1. The Steward,
  2. The Clerk of Course, or
  3. Any other official in charge thereof, may enter the starting area unless authorised by a relevant official or otherwise for purposes permitted under these Rules.
17.14.4.3 The supplementary regulations may prescribe the time for delivery of machines into the starting area before the start of an event and thereafter machines must:

  1. Remain in the starting area until the start,
  2. Be returned at the end of each day for detention overnight,
  3. Be released in time for the start of the next day,
  4. Be in the open air and not covered in any manner.

17.14.5 Preliminary Examination

17.14.5.1 Before each event, there must be a preliminary examination of competing machines.
17.14.5.2 At the preliminary examination, each machine may be tested for noise and marked if it does not exceed the prescribed noise emission levels.
17.14.5.3 At the conclusion of the preliminary examination each machine must be delivered into the parc fermé. No motorcycle may enter parc fermé without a stand approved at machine examination.
17.14.5.4 An event commences at the conclusion of the preliminary examination.

17.14.6 Starting Order and Numbers

17.14.6.1 The starting order of groups or classes will be as determined by the supplementary regulations.
17.14.6.2 The starting numbers of riders will be determined by a draw for each class.

17.14.7 Starting Procedures

17.14.7.1 The start signal for each competitor must be given as nearly as practicable to that competitor’s scheduled starting time.
17.14.7.2 It is not permitted to start the engine in:

  1. The parc fermé, working area, or
  2. The starting area before the starting signal is given.
17.14.7.3 Within one minute of the signal being given, the competitor must:

  1. Start the engine at the starting line using the machine’s kick starter or starter motor,
  2. Cross a second line 20 metres from the starting line under engine power.
17.14.7.4 A competitor who arrives at the starting line more than one minute late for that competitor’s allocated starting time:

  1. Will lose 60 points for every minute late,
  2. Must be allocated a new start time which must be the indicated time of arrival at the starting line ignoring seconds,
  3. Must comply with standard starting procedures,
17.14.7.5 If the competitor is more than 60 15 minutes late, they will be excluded for the day.
17.14.7.6 On each day of the event, competitors may enter the parc fermé 15 minutes before their starting times and move their machines by hand to the entry to the work area.
17.14.7.7 Competitors may have 10 minutes before their starting times to carry out machine preparation.

17.14.8 Event Procedures

17.14.8.1 For Enduros, the total time for the day of competition must not exceed 71/2 hours, including the 15 minutes at the final time check.
17.14.8.2 Competitors must at all times during the event:

  1. Remain on the course,
  2. Follow the competition direction.
17.14.8.3 At the beginning or end of a lap, a section or day, the Clerk of Course, due to weather or other conditions, may:

  1. Declare a section of the course to be impassable and in that event:
    1. That section will cease to be part of the course, and
    2. Any penalties incurred in that section will not be taken into account in scoring for the event.
  2. Change the time schedule for the section to a slower schedule.
17.14.8.4 Each competitor must be allocated a starting time and a time for each section between time checks.
17.14.8.5 The recorded arrival time for each competitor in a section is the starting time for that competitor in the next section.
17.14.8.6 During an event the competitor must have all marked parts on the motorcycle at all times when on the course, subject to GCR 17.14.11.
17.14.8.7 During an event, a competitor must not stop between the yellow flags and the control table.
17.14.8.8 A competitor may pass the final time check at the entrance to the parc fermé early, without penalty.
17.14.8.9 When the machine is placed in the parc fermé it must be completely equipped with all the marked parts.
17.14.8.10 At the end of any event there may be a final examination at which any of the machines may be impounded for examination.
17.14.8.11 If a competitor can convince the Jury he was delayed by abnormal circumstances outside his control, (e.g. providing assistance to an injured competitor), an allowance may be granted. Alleged baulking by another competitor is not an abnormal circumstance.
17.14.8.12 When the case of a rider is under discussion he may continue in the event until the jury makes the final decision.

17.14.9 Restarts

17.14.9.1 A competitor who retires, or is excluded from an event for a day:

  1. For multi-day events, may restart in the competition on following days from the rear of the field,
  2. For single day events, or if the competitor is excluded or retires for a second time from a multi-day event, may not continue on the course.
17.14.9.2 To be eligible to restart, a competitor must deliver the machine to the parc fermé at least 60 minutes before the amended start time.

17.14.10 Time Cards, Route Cards and Itinerary

17.14.10.1 Each competitor must stop at all time-checkpoints and route checkpoints.
17.14.10.2 Time cards must be issued and route cards may be issued:

  1. For the first day, at the preliminary examination,
  2. For all other days, as competitors leave the parc fermé at the end of the previous day.
17.14.10.3 Time cards:

  1. Must be presented at each control table, or, on demand, to an official,
  2. Must be handed in at the end of each day to the final control official,
  3. Must not be altered or obliterated by any competitor,
  4. Must not be exchanged between competitors,
  5. Must, in the event of loss, be replaced by the official in charge of the next time control,
  6. May show the prescribed running time for each section.
17.14.10.4 Route cards:

  1. Must be presented at all route checks,
  2. Must be handed in at the end of each day to the final control official,
  3. Must not be altered or obliterated by any competitor,
  4. Must not be exchanged between competitors,
  5. Must, in the event of loss, be replaced by the official in charge of the next time control.
17.14.10.5 Itineraries:

  1. Must be issued at the preliminary examination or displayed prominently in the starting area,
  2. Must clearly indicate all competition distances and show the prescribed running time for each section,
  3. Must contain samples of signs or indicators used for course markings,
  4. Are, for all purposes connected with the competition, deemed to be accurate.

17.14.11 Maintenance, Repair, Alteration and Refuelling

17.14.11.1 A machine may be cleaned, altered, repaired or refuelled during an event as follows:

  1. Subject to sub-Rule b), assistance is not permitted during the course of an event,
  2. A competitor may receive assistance for the following:
    1. Refuelling,
    2. Removing, replacing and replenishing:
      1. Coolant,
      2. Engine and gearbox lubricating oils and removal and replacement of oil filters.
    3. Removing air from the braking circuit,
    4. Inflating tubes and tyres.
    5. Cleaning number plates and plastic parts of the motorcycle with the aid of a sponge or cloth.
  3. No work on the machine may take place:
    1. In any tent, vehicle or other enclosed place,
    2. In the parc fermé,
    3. In the time check area.
  4. The rider is allowed to change any unmarked parts anywhere on the course but may receive spare parts and tools only in the servicing areas.
  5. A competitor may not receive or use the following tools:
    1. Any form of welding equipment other than for repairs to the exhaust system,
    2. Pressure cleaning apparatus,
    3. Electrical and air powered tools operated by remote connection.
  6. A competitor may, for the purposes of carrying out alterations or repairs, receive spare parts:
    1. In the working area in the starting area,
    2. Between the white and yellow flags adjacent to a time check point.
  7. A competitor may leave used parts where the alterations or repairs were carried out.
    1. A rider wishing to repair or replace the silencer of his machine can do so at the end of the day, after the last time check and before entering the parc fermé. The work must be carried out under the supervision of an official.
    2. The rider will be allowed an extra time of 60 minutes for this work.
    3. The same applies to riders who for any reason have been told by the Clerk of the Course to have their machines noise tested.
    4. The rider may request as many noise tests as he wishes during the 60 minutes allowance.
    5. After 60 minutes have elapsed, the rider will be required to present his machine to the noise control test official for testing. If the noise level is above the required standard, the rider will be disqualified (or other penalties given as provided for in the GCRs).
    6. If the silencer is changed during the day, the rider must present it to be noted at the next time check point. At the end of the day, a noise control test will be carried out during the 60 minutes allowance. If the test is passed, the silencer will be marked with the official paint. If not, the rider may be excluded (or other penalties given as provided for in the GCRs.)
  8. The engine must be stopped during refueling,
  9. The rider must dismount from the motorcycle during refueling,
  10. An environmental mat or other effective device is required to be used when refueling, replenishing all oils and chemicals (including the oiling of chains) in order to stop ground contamination. The minimum dimensions of the mat or other effective devices must be at least 500mm x 500mm. The penalty for non-compliance may be discretionary. From 1st January 2016, minimum specifications of the enviromat will be as follows: dimensions minimum 160cm x 100cm; absorption capacity minimum 1 litre; thickness minimum 5mm.
  11. No fuel may be carried other than in a tank or container permanently attached to the machine,
  12. Unless otherwise stated in the supplementary regulations, replacement of any fluids except water or coolant is only permitted in the work area and at a time check between the white and yellow flags where service is permitted,
  13. There must be at least one refueling depot every 50 km.
  14. Tyres may only be changed:
    1. At the final service area,
    2. In the work area at the start.

17.14.12 Assistance

17.14.12.1 All outside assistance is forbidden, other than the normal assistance given at the official time checks.
17.14.12.2 The term “outside assistance” refers to the act involved when any person, other than the rider or an official performing his duties, comes into contact with the motorcycle.
17.14.12.3 No machine may be moved otherwise than by:

  1. Its engine, or
  2. The actions of its rider.
17.14.12.4 No competitor may be accompanied anywhere on the course.
17.14.12.5 The term “accompanied” refers to the act of riding in company for the purpose of receiving assistance, with any person other than a registered official of the event in the course of their duties.
17.14.12.6 In any replenishment area, the chain can be lubricated but only the rider is allowed to do this work.

17.14.13 Inspection and Marking

17.14.13.1 At any time check a relevant official:

  1. Must record the time as displayed on the clock when the competitor’s time card is presented,
  2. May inspect any machine,
  3. May mark any part,
  4. May direct the alteration of any machine which does not comply with any requirement of these Rules or the supplementary regulations,
  5. May direct the administration of any noise or other test,
  6. May report any competitor or machine to the jury or a key official.
17.14.13.2 Any competitor required to submit to a noise test under the preceding Rule:

  1. May request further tests during the 30 minutes next after the completion of the initial test,
  2. May be required, at the expiration of that time, to submit to a further test,
  3. May not continue in the event if, at the expiration of that time, the machine does not comply with the prescribed noise emission levels.

17.14.14 Timed Tests

17.14.14.1 Timed tests must be as follows:

  1. Average speed must not exceed 50 km/h.
  2. Competitors may inspect test courses on foot but not by wheeled vehicle,
  3. Be safe and of a reasonable degree of difficulty,
  4. For multi-day events, be marked not less than 48 hours before the scheduled start time for the test,
  5. A rider who leaves the test course and gains an advantage may incur penalties as in GCR 7.1.6.

17.14.15 Cross Tests and Enduro Tests

17.14.15.1 Cross tests and Enduro tests must be as follows:

  1. Cross test courses must:
    1. Be between two and five kilometres in length,
    2. Be specially prepared for the test,
    3. Have safety zones at all bends and other places of potential danger to spectators, with a minimum width of one metre to which spectators have no access,
    4. Start within one kilometre of a time check point,
    5. Have the start and finish line in the same vicinity.
  2. Enduro test courses must:
    1. Be readily accessible to a four-wheel drive vehicle,
    2. Be on a section of the course between two time checks,
    3. Be between three and 10 kilometres in length,
    4. Be untimed during the first lap and timed during subsequent laps,
    5. For multi-day events, an Enduro test which is ridden on previous days and repeated in the same direction on future days may be timed on the first lap of these subsequent days.
  3. Each competitor must:
    1. Start with the engine running,
    2. Come to a stop at the start line, as directed by an official, and start within 10 seconds after being directed by the official,
    3. The riders start time will be the moment the front wheel moves past the recording device or at the expiration of the 10 seconds.
  4. More than one test may be run on the same course in each day,
  5. Tests must have flying finishes with each competitor’s time being recorded at the point of crossing the finish line,
  6. Competitors may inspect special test courses on foot,
  7. As each competitor finishes they must resume the principal course without stopping.

17.14.16 Final Test

17.14.16.1 At the end of an event there may be a final test which must be a closed circuit with a minimum of five laps and a maximum of 10 laps covering a total distance of between 10 and 18 kilometers.
17.14.16.2 Before the start of the test all machines must be delivered to a parc fermé.
17.14.16.3 Prior to competition, there will be a voluntary escorted preliminary lap of the course.
17.14.16.4 Tests will be divided into groups based on classes.
17.14.16.5 Should a competitor finish the road test late, the competitor may be transferred to another group.
17.14.16.6 Restart competitors must not compete in a test with competitors who are still in the competition. They may compete in a separate test if one is scheduled by the organisers
17.14.16.7 For multi-day events, massed starts must be used with grid positions determined by placings at the end of the previous day.
17.14.16.8 For one-day events, grid positions must be allocated by the Promoter.
17.14.16.9 At the conclusion of the prescribed number of laps by the leading rider, the chequered flag will be shown. From the time the race winner takes the chequered flag five minutes will be allowed for other riders to complete the lap they are on, after which the test is over.

17.14.17 Finish of Event

17.14.17.1 All finishing machines may be impounded for 30 minutes.
17.14.17.2 For each machine an event finishes:

  1. If there is a final examination, at the conclusion of the examination of the machine,
  2. If there is no final examination, at the moment the machine arrives at the final time check.
17.14.17.3 A rider is considered to have finished the Enduro when he has passed the final time check of the event. Failure to complete the final speed test (if applicable) will incur the maximum penalty as per Rule 17.14.18.

17.14.18 Enduro Penalties

17.14.18.1 Penalty points are incurred as follows:

PENALTY

POINTS

Late arrival at the start line 60 points per minute
Not crossing the 20m line under power within time 10 points
Early and late arrival at a time check 60 points per minute
Stopping between yellow flags and control table at time check 60 points
Starting of engine in starting area prior to start signal 60 points
Starting the engine in the parc fermé or work area 120 points
Uncompleted day for a competitor 7,200 points
Special tests – for each 1/100 sec 1/100 point
Final test – for each uncompleted lap plus the time of the slowest completed test time in the same class 60 points
Individuals who restart – per day plus points for completed special tests 7200 points

17.14.19 Classification of Individuals and Teams

17.14.19.1 For individual classification, the time obtained each day will be added for each rider in each class and in each category. The rider with the total lowest time will be placed first and so on.
17.14.19.2 For individuals, daily penalty points will be accumulated.
17.14.19.3 For teams:

  1. For the team classification, the times obtained by each team rider will be added together to form the daily time of the team. The team with the total lowest time will be placed first and so on,
  2. Daily penalty points will be accumulated.
17.14.19.4 Where a competitor is a member of a team:

  1. The team will incur 7,200 penalty points for each day of the event that that rider does not complete.
  2. If the competitor is permitted to restart after exclusion for a day, the team will incur 7,200 points for the day the competitor was excluded plus 7,200 for each following day.

17.14.20 Exclusion from an Event

17.14.20.1 A competitor is liable to be excluded from an event for any of the following acts during the event:

  1. Competing on a machine with an engine capacity different from that stated on the entry form,
  2. Receiving spare parts or tools anywhere on the course except the service areas. (i.e. The working area and at time checks between the white and yellow flags),
  3. Replacing any marked part without authorisation,
  4. Failing to have all marked parts on the motorcycle at all times when on the course, subject to GCR 17.14.11.
  5. Placing the motorcycle in the parc fermé without all the marked parts.
  6. Without authorisation, entering the parc fermé other than to collect or deliver the machine,
  7. In the parc fermé:
    1. Touching any other competitor’s machine,
    2. Touching his or her machine other than for purposes of collection or delivery,
  8. Smoking in the parc fermé, working area, or between the white and yellow flags,
  9. Placing the machine in the parc fermé more than two hours after the competitor’s scheduled finishing time,
  10. Without authorisation, placing the machine in any tent, vehicle or other enclosed place,
  11. Carrying fuel on a machine other than in a permanently attached tank or container,
  12. Not stopping the engine during refueling,
  13. Without authorisation:
    1. Communicating with accompanying persons,
    2. Being accompanied by another competitor,
    3. Accompanying another competitor.
  14. Not observing traffic regulations,
  15. Knowingly failing to hand in time cards at the finish of each day,
  16. Altering a time card or route card or using another rider’s card,
  17. Practicing on the special test course,
  18. Inspecting the special test course other than on foot,
  19. Riding against the direction of the course,
  20. Competing on a machine the engine of which exceeds the maximum capacity of the entered class.

17.14.21 Exclusion for a Day

17.14.21.1 A competitor is liable to be excluded for the day from an event if, during that day, they do any of the following:

  1. Failing to pass a noise control test,
  2. Refueling outside refueling areas,
  3. Failing to deposit the machine in the parc fermé forthwith after the final check-in of the day,
  4. Entering the parc fermé with the engine running,
  5. Receiving outside assistance other than for purposes of:
    1. Refueling,
    2. Removing, replacing and replenishing:
      1. Coolant,
      2. Brake fluids,
      3. Engine and gearbox lubricating oils and removal and replacement of oil filters.
    3. Inflating tubes and tyres.
  6. Arriving more than 15 minutes late for the start,
  7. Arriving more than 30 minutes late for a time check (the rider may opt to continue the event until the Clerk of Course makes a final decision).
  8. Moving the machine otherwise than by:
    1. Its engine, or
    2. The actions of the competitor.
  9. Riding off the course or against the course direction,
  10. Failing to get the time card and/or control check list marked at a time check,
  11. Missing a time check or a route check,
  12. Changing tyres other than:
    1. At the final service area, or
    2. In the working area in the start area.
  13. Receiving or using prohibited tools.
17.14.21.2 A competitor liable to the penalties prescribed in the two preceding Rules may apply to the Steward for a reduction in penalty. The Steward, on being satisfied that penalties were incurred in exceptional circumstances, may:

  1. Determine that no penalty should be imposed,
  2. Impose a lesser penalty.

17.14.22 Explanation of Results

17.14.22.1 A competitor may, no more than 24 hours after the publication of the results of any day’s run, request from the Clerk of Course an explanation of those results.

17.14.23 Junior Enduro Courses

17.14.23.1 Enduro courses for Juniors should have time checks no less than 5km and no more than 20km apart.
17.14.23.2 Enduro courses for Juniors must have one refueling stop every 35km.
17.14.23.3 For Junior Enduros the total time for the day of competition must not exceed four hours, including the 15 minutes at the final time check.

17.14.24 Junior Event Procedures

17.14.24.1 Junior riders may receive assistance starting their machine at the special test start line.
17.14.24.2 Junior riders may be given a new start time should they stall their machine on the start line.
17.14.24.3 Junior competitors may receive parts anywhere on the course.
17.14.24.4 Junior competitors may receive outside assistance anywhere on the course.